Talson F1227 walking floor semi-trailer

We have 28 of the same trailers for sale!

Additional options and accessories:
- Galvanised semi-chassis (Corrosive resistance and durability for years.) made of high tension ST52 steel, consisting of 2 welded longitudinal beams in "C" form and cross beams at needed distances,
- Tri-axle pneumatic assembly with BPW drum brakes and 8 t load capacity. Lifting and lowering valve including extra tank. Ramp Height 1.170 mm with BPW,
- Axle Lifting Drive automatically by EBS and electrical feed-through button at the trailer (1st axle),
- 12 units 215/75 R 17.5 tyres, steel rims for drum axle, for 17,5 tyres,
- 2 pieces Jost mechanic landing gear with 2 speeds, capacity 24 tons,
- EBS 2S/2M double circuit brake system with RSS, spring-actuated parking brake in accordance with EC Directive 71/320 EEC . Automatic brake adjusters on all axles,
- 24 Volt lighting installation with 2 x 7 + 15 pin plug socket, according to Directive 75/756/EEC,
- Automatic return to ride height valve,
- 27 mm thick resin coated plywood floor, 5 rows Rollertracks (Twin Type) with extra floor reinforcement like Jan De Rijk,
- Auto-down function and quick release valve for roller tracks,
- Pallet stopper (Front Wall + Rear Frame + Cross) (For each 4 aircargo pallettes),
- 13 x 2 lashing rings embedded to floor according to DIN 75410,
- Frameless light weight aluminium box. Talson exterior side walls have corrosion resistance characteristics, made of certificated aluminum pre-painted plates, sides riveted to aluminium profiles on equal mutual distance.
- External surface is aluminium panels, inside covered with 18 mm plywood. Inside panel is reinforced with omega profiles.Galvanized steel kickplate,
- Side walls finished with Talfix® panels. Talfix panels increase stiffness of the vehicle. Talfix® is suitable for double-deck applications enabling multi level loading with 700 kg capacity per 1 m, Talfix® is suitable for hanging garments and also suitable for load securing applications. Galvanized steel kickplate,
- Concorde Roof ( Inner Height = Front 2.950 mm - Rear 3.030 mm),
- Roof is 23 mm thick, external aluminium panels, inside covered polyester with 4 x LED lamp,
- Steel rear door frame, with double doors with a door lock. Each door is with 4 hinges and 2 stainless steel external rods,
- Elevated loading height at rear door = 3.020 mm,
- Steel crash plate between the rollertracks, at the rear,
- Rear bumper - New type aluminium underride guard in accordance with Regulation UN ECE 58.3,
- Ferrybumper welded to chassis as protection for rear lamps / bumper,
- 2x Stainless steel toolbox mounted right and left side in front of 1st axle (1200x500x500 mm),
- Side Underrun Guard - Lateral protective device made of steel profiles can be swiveled upwards according to Directive 89/297/EEC,
- Mudguard - Spray-suppression system applications according to EU directives,
- Load safety certificate in compliance with Standard EN 12642 Code XL - VDI 2700,
- No entrance ladder,
- ADR plate rivited to reardoor,
- 2x square type Loading bar included,
- 2 ECE R70 reflectors,
- Flat document box on frontwall,
- 2 pieces plastic wheel chocks and holders.